verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke60 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$43.20 $49.80Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB

The ACEJ20X60-30SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. The -30 code adds a 30 mm adjustment window: an external stop screw trims the 60 mm extend stroke down to 30 mm on site, so one cylinder covers a 30-60 mm range without reordering. The S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted anywhere along the body slots.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs, guarding and gantry frames. A hard-anodized aluminium body carries an S45C hard-chrome-plated 10 mm rod with a male thread (B code), and fixed TPU bumpers absorb end-of-stroke energy at both ends. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke60 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×60Stroke length in mm.
-30Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB Is Used

conveyor_belt

Packaging line reject pushers

On a carton or blister line, the 20 mm bore nudges off-spec packs off the belt, and the fitted magnet with CMSE switches confirms the pusher has returned home each cycle.

science

Bench-top test and clamping rigs

Lab and QC fixtures use the male rod thread to carry a custom probe or pad, applying up to 219.9 N at 0.7 MPa while the compact body fits inside a guarded frame.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB the Right Cylinder?

Size the job both ways before ordering. Remember the stop screw is a mechanical end stop only: it sets the extend position but does not lock the piston, so on air loss the rod will drift. Mounting drops straight onto the ISO 21287 face - FA flange or LB foot brackets plus I and Y rod knuckles - and because the magnet is already fitted (S code), CMSE / DMSE switches can be added at any time. The male rod thread suits fixtures that clamp directly onto the rod; choose the female-thread version if your clevis needs a tapped hole.

AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB FAQ

At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push rises to 219.9 N and pull to 164.9 N; theoretical maximum is 32 kgf at 1.0 MPa. It is double acting with a 60 mm stroke adjustable down to 30 mm via the external stop screw (-30 window), running 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C. Port is 1/8" and the rod is 10 mm with a male thread.

The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. End-of-stroke energy is absorbed by fixed TPU bumpers, and FA flange or LB foot brackets plus I/Y rod knuckles bolt straight to the standard face. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for end-of-stroke or mid-range detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X60-30SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X60-30SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.