
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X75-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X75-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 75 mm stroke down by up to 10 mm, giving a usable range of 65-75 mm without changing the cylinder. The male (B code) rod thread on the 10 mm rod bolts straight to your tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into shallow fixtures and guarded cells. The hard-anodized aluminium body carries a hard-chromed S45C rod, fixed TPU bumpers sit at both ends, and the optional -S magnet code enables CMSE / DMSE switches; this unit has no magnet fitted.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X75-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short body, about 50% shorter than an ISO 15552 profile cylinder, fits inside tight jig plates, and the male rod thread accepts a custom stop pad directly.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - the rod will drift if air is lost. Choose FA flange or LB foot mounting to match the fixture, order the -S code if CMSE / DMSE position sensing is needed, and pick PT or G ports at checkout.
Quick checklist
Push is 157.1 N and pull 117.8 N at 0.5 MPa; at 0.7 MPa push rises to 219.9 N and pull to 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 10 mm extend-stroke adjustment window (65-75 mm usable).
An external stop screw shortens the extend stroke by up to 10 mm on site, so the 75 mm stroke can be set anywhere from 65 to 75 mm; it is an end stop, not a load-holding brake. Position sensing requires the optional -S magnet code, which allows CMSE / DMSE switches on the body slots - without -S no magnet is fitted. Mounting options include FA flange and LB foot, and the male rod thread is M6x1.0.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.