
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X80-20SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X80-20SB is a double acting AirTAC compact cylinder built to ISO 21287, with an adjustable extend stroke: an external stop screw trims the 80 mm stroke by up to 20 mm on site, giving a usable range of 60-80 mm. The male rod thread (B code) suits inline tooling, and the -S magnet is fitted, so CMSE or DMSE switches can be mounted in the body slots for end-of-stroke signalling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding where a full-length body will not fit. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body resists wear, and the S45C hard-chrome rod keeps friction low across the 30-500 mm/s speed range.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-20SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
With about 8 kg vertical-lift equivalent and a short body that fits under low guard rails, this cylinder kicks cartons or blisters off a conveyor at up to 500 mm/s.
The fitted -S magnet works with CMSE / DMSE switches to confirm the trimmed extend position, so the rig interlocks before the probe cycle starts.
If your load needs more than about 94 N of usable force, step up to 25 mm; if under 60 N, the 16 mm bore saves space and air. Remember the stop screw is a mechanical end stop, not a mid-stroke lock - on air loss the piston can still drift, so use a separate valve or lock for load holding. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet lets CMSE / DMSE switches report the trimmed stroke position.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 80 mm extend stroke by up to 20 mm, so the working range is 60-80 mm. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, and cycles at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the port is 1/8" on this 20 mm bore. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches can be clipped into the body slots; models ordered without -S have no magnet. FA flange and LB foot mounts bolt straight to the ISO 21287 face, and a fixed TPU bumper at each end absorbs end-of-stroke energy - it does not hold or brake a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.