
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X80-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X80-40B is a double acting AirTAC compact cylinder built to ISO 21287, with a 20 mm bore and an 80 mm stroke that an external stop screw can trim anywhere in a 40 mm window, giving a usable extend range of 40-80 mm. At 0.5 MPa it pushes with 157.1 N and pulls with 117.8 N, rising to 219.9 N on the extend stroke at 0.7 MPa. The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding.
The male rod thread (the B code) bolts straight to tooling without an adapter nut, and the rod is S45C steel with hard-chrome plating running in a roller-burnished, hard-anodized bore. A fixed TPU bumper at each end absorbs end-of-stroke energy, speed spans 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi). Note that no magnet is fitted on this version; the optional -S code adds one for CMSE / DMSE switches.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting beside narrow conveyor frames to divert cartons at 30-500 mm/s.
About 94 N of usable force at 0.5 MPa presses test cassettes and microplate lids evenly, with the male rod thread mounting the press head directly.
The 40 mm adjustment window lets one cylinder serve several product widths on the same fixture. The stop screw is a mechanical end stop only - on air loss the piston still drifts, so add a separate valve or lock if you need to hold a load mid-stroke. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face, and if position feedback matters, order the -S variant so CMSE / DMSE switches can be used.
Quick checklist
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa push is 219.9 N, and the theoretical maximum is 32 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 80 mm extend stroke on site, so the working range is 40-80 mm. It shortens the stroke only and never extends it past 80 mm.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and FA flange, LB foot, FTC brackets plus I/Y rod knuckles available. This version has no magnet fitted; ordering the optional -S code adds one so CMSE / DMSE switches can detect position. Port is 1/8" and the rod end is male thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.