verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke80 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$43.63 $50.27Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B

The ACEJ20X80-50B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 80 mm stroke by up to 50 mm on site, giving a usable range of 30-80 mm without changing the cylinder. At 0.5 MPa the 20 mm bore delivers 157.1 N on the extend stroke and 117.8 N on retract, rising to 219.9 N at 0.7 MPa. The male rod thread (B code) bolts straight to tooling, and the 1/8" ports keep the plumbing small.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the optional -S magnet enables CMSE / DMSE switches when position sensing is needed.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke80 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×80Stroke length in mm.
-50Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B Is Used

precision_manufacturing

Jig clamping on CNC fixtures

The 30-80 mm trim window lets one cylinder serve several fixture heights, with 157.1 N at 0.5 MPa enough to hold small aluminium parts during drilling.

conveyor_belt

Packaging line reject pushers

About 94 N of usable force at 0.5 MPa kicks underweight cartons off a narrow conveyor, and the short body fits under low guard rails.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B the Right Cylinder?

Remember the stop screw is a mechanical end stop only, so on air loss the rod still drifts; it is not a load-holding device. Order FA flange or LB foot mounting to match the fixture, add the -S code if CMSE / DMSE switches are planned, and keep the male thread in mind when sizing rod couplings.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B FAQ

At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those rise to 219.9 N and 164.9 N, with a theoretical maximum of 32 kgf at 1.0 MPa. The -50 code means the external stop screw can shorten the 80 mm extend stroke by up to 50 mm, so the working range is 30-80 mm. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), and moves at 30-500 mm/s.

The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body and S45C hard-chrome rod. This model has no magnet fitted; order the optional -S version to enable CMSE or DMSE switches. FA flange and LB foot mountings bolt to the standard face, and a fixed TPU bumper at each end absorbs end-of-stroke impact.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X80-50B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X80-50B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.