
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X90-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ20X90-40B is a double acting ISO 21287 compact cylinder with a 20 mm bore and a 90 mm stroke that an external stop screw trims anywhere in a 40 mm window, giving a usable extend range of 50-90 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N, rising to 219.9 N at 0.7 MPa, with a theoretical peak of 32 kgf at 1.0 MPa. The male rod thread (B code) on the 10 mm S45C hard-chrome rod bolts straight to standard tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into compact pick-and-place heads and guarded test rigs. Note this model carries no magnet: order the optional -S code if you later need CMSE / DMSE switch position feedback.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X90-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
About 8 kg of vertical lift with margin seats test plugs on small housings, while the compact body fits inside the guarding of a lab bench rig.
With roughly 94 N of usable work force at 0.5 MPa, the cylinder pushes 100-200 g packages across a sorter lane, and the male rod thread accepts a custom pusher paddle.
The 90 mm stroke sits under the 100 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the stop screw only shortens the extend stroke within the 40 mm window and acts as an end stop, not a mid-stroke lock: on air loss the piston still drifts. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face, and the male rod thread suits clevis-style tooling.
Quick checklist
It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, with a fixed TPU bumper at both ends and a 1/8" port.
An external stop screw shortens the 90 mm extend stroke by up to 40 mm, so you can set any extend length from 50 to 90 mm on site; it is an end stop, not a load-holding brake. This version has no magnet, so no switch can be read from it; order the optional -S magnet variant to enable CMSE / DMSE reed or solid-state switches. The hard-anodized aluminium body mounts via FA flange or LB foot and saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.