
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X110-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X110-100B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 110 mm stroke that an external stop screw trims anywhere in a 100 mm window, giving a usable extend range of 10-110 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this heavy thrust class fits presses and clamping gantries that cannot house a full-length profile cylinder.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (the B code), the 1/4" port depends on the bore, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Note that no magnet is fitted on this version; the optional -S code is what enables CMSE / DMSE switch sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X110-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body tucks under guard rails where an ISO 15552 profile cylinder would overhang, while 8590.3 N at 0.7 MPa swings heavy divert gates all shift long at 30-500 mm/s.
If your fixture needs mid-stroke position holding, remember the stop screw is a mechanical end stop only: on air loss the piston still drifts, so add a separate valve or lock for load holding. FA flange or LB foot mounting bolts to the ISO 21287 face, and if end-position sensing is needed, reorder with the optional -S magnet for CMSE / DMSE switches.
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull is 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 110 mm extend stroke by up to 100 mm, so the usable range is 10-110 mm. It shortens the stroke only and never extends it past the ordered value, and it is an end stop, not a load-holding lock.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, 25 mm S45C hard-chrome rod with male thread (B code), 1/4" PT ports, fixed TPU bumpers at both ends, speed 30-500 mm/s, air filtered to 40 um, 0.15-1.0 MPa (22-145 psi) operating pressure with 1.5 MPa (215 psi) proof. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code; this unit has no magnet, so CMSE / DMSE switches cannot be mounted unless -S is ordered. Mounting: FA flange, LB foot, plus I and Y rod knuckles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.