
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X125-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 125mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X125-100B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. The -100 code gives a 100 mm adjustment window: an external stop screw trims the extend stroke anywhere between 25 and 125 mm on site, so one cylinder serves several die or fixture positions.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a press gantry or heavy clamp station. A hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (B code), and fixed TPU bumpers absorb end-of-stroke shock at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X125-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamping arms on palletizing heads need the 8590.3 N available at 0.7 MPa; the male rod thread (B) accepts knuckle joints directly.
A 313 kg vertical lift with margin handles dense metal scrap drops in foundry transfer stations, with TPU bumpers softening each bottom-of-stroke impact.
At this force class the choice sits between trimming down from 125 mm and stepping up or down in bore. If 6135.9 N is marginal for your load, move to a larger frame rather than relying on the stop screw, which is a mechanical end stop only and will not hold a load if air is lost.
Mount FA flange or LB foot brackets on the ISO 21287 face, and pair with I or Y rod knuckles for offset loads. This unit has no magnet because the S code was not ordered; add -S if you later need CMSE or DMSE switch positioning. Operating window is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push reaches 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -100 code means an external stop screw shortens the 125 mm extend stroke by up to 100 mm, giving a usable range of 25-125 mm. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, at 30-500 mm/s and -20 to +70 C, with a 1/4" PT port and a 25 mm male-thread rod.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits where a full-length profile cylinder cannot. Fixed TPU bumpers at both ends absorb end-of-stroke impact. Mounting uses FA flange or LB foot brackets plus I/Y rod knuckles. This unit has no magnet fitted; order the optional -S code to enable CMSE or DMSE switches for end-of-stroke signalling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.