
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X160-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder, the ACEJ125X160-100B pairs a 125 mm bore with a 160 mm stroke that an external stop screw trims by up to 100 mm, giving a usable extend range of 60-160 mm on site. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting this force class fit inside presses, guards and gantries that a full-length body cannot.
Construction is a hard-anodized aluminium-alloy body with a roller-burnished bore, an S45C hard-chrome-plated 25 mm rod, and a fixed TPU bumper at each end that absorbs end-of-stroke energy. The B code gives a male rod thread and the port is 1/4" (PT). Air supply is filtered to 40 um, operating pressure is 0.15-1.0 MPa (22-145 psi), speed range is 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In a stamping shop the short ISO 21287 body drops into a die cart fixture where an ISO 15552 profile cylinder would be about twice as long, with FA flange mounting for rigid alignment.
Swinging heavy pallet-line gates, the male-threaded 25 mm rod takes an I or Y knuckle while the fixed TPU bumpers absorb the gate settling at each end of travel.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and order the -S code if CMSE / DMSE position sensing is needed.
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 160 mm extend stroke on site, so the usable range is 60-160 mm. It cannot lengthen the stroke past the ordered 160 mm, and the stop is not a load-holding brake.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. Position sensing requires the optional -S magnet, which allows CMSE / DMSE switches; this model has no S code, so no magnet is fitted. Mounting options include FA flange, LB foot and FTC brackets plus I and Y rod knuckles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.