verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke175 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$254.59 $275.46Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B

A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X175-100B pairs a 125 mm bore with a 175 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa - enough for heavy clamping, pressing and lifting duties. The external stop screw trims the extend stroke anywhere within the ordered 100 mm window, so the same cylinder covers 75-175 mm on the machine.

The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 175 mm stroke must fit inside a press frame or guard. A hard-anodized aluminium body with a 25 mm S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a fixed TPU bumper at each end.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke175 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×175Stroke length in mm.
-100Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B Is Used

factory

Clamping on machining centres

The male rod thread (B code) bolts straight to custom clamps for fixture clamping on CNC machining centres, and the short ISO 21287 body tucks into tight fixture plates.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B the Right Cylinder?

Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve where a load must stay put. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for swivelling joints, and if you need position sensing order the optional -S magnet version - this B-code unit has no magnet, so CMSE / DMSE switches cannot be fitted.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 175 mm extend stroke on site, giving a usable range of 75-175 mm. It shortens the stroke only - it never extends past 175 mm, and it is a mechanical end stop, not a load-holding brake. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.

The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, 25 mm hard-chrome S45C rod and a fixed TPU bumper at both ends that decelerates at the ends of travel. Sensing requires the optional -S magnet code, which enables CMSE / DMSE switches; this model (no S code) carries no magnet, so no switch can be mounted. Mounting options include FA flange and LB foot, with PT ports (1/4") and a male rod thread from the B code.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X175-100B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X175-100B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.