
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X225-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X225-100B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. The male-threaded 25 mm rod (the B code) bolts directly to tooling plates and clamps. The hard-anodized aluminium body with an S45C hard-chrome plated rod stands up to high-cycle factory work.
The -100 code gives a 100 mm adjustment window: an external stop screw trims the 225 mm extend stroke down to 125 mm on site, so one cylinder covers several die or fixture positions. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in heavy presses and gantries. Fixed TPU bumpers absorb end-of-stroke shock at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X225-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 25 mm male-thread rod drives mold carts on sand-casting lines, where the short ISO 21287 body fits under low gantry beams.
The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so on air loss the piston still drifts; add a separate valve or lock for load holding. Order FA flange or LB foot mounting to suit the frame, and add the -S code if you later need CMSE / DMSE switch sensing - this unit has no magnet fitted.
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 225 mm extend stroke to any length down to 125 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight press frames and gantries. FA flange and LB foot mountings bolt to the standard face. For sensing, order the optional -S magnet version, which accepts CMSE / DMSE switches; this model without the S code has no magnet, so no switch can be mounted. Weight and outline dimensions: confirm from datasheet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.