
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X75-20B pairs a 125 mm bore with a 75 mm stroke and a male rod thread (B code). The external stop screw trims the extend stroke anywhere within the ordered 20 mm window, giving a usable range of 55-75 mm without changing hardware.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder fits presses and fixtures where a full-length body cannot. A hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod, and fixed TPU bumpers absorb end-of-stroke energy at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore press fits inside guarded cells where a full-length body will not.
Size the stroke both ways: the stop screw only shortens the extend stroke within the 20 mm window, it never lengthens it past 75 mm, and it is a mechanical end stop - on air loss the piston still drifts, so add a locking valve if the load must stay put. FA flange or LB foot mounting bolts to the ISO 21287 face, and the male rod thread suits external knuckles. This unit has no magnet; order the optional -S code if you need CMSE / DMSE switch position sensing.
Quick checklist
Push is 6135.9 N and pull 5890.5 N at 0.5 MPa; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 75 mm extend stroke to any value from 55 to 75 mm. It is a mechanical end stop only - it does not hold a load if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the port is 1/4" PT with a male rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, a 25 mm hard-chrome-plated S45C rod and fixed TPU bumpers at both ends. FA flange and LB foot mountings bolt to the standard face. Position sensing requires the optional -S magnet code - this model (no S) has no magnet, so no CMSE or DMSE switch can be mounted; order ACEJ125X75-20SB if you need switching.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.