
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X75-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X75-75B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 75 mm stroke that an external stop screw can trim anywhere in a 75 mm window, giving a usable extend range of 0-75 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N at 0.7 MPa, with a theoretical peak of 1251.4 kgf at 1.0 MPa. The male rod thread (B code) on the 25 mm rod bolts straight into male-threaded tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class still fits compact presses and guarding where a full-length body cannot. The hard-anodized aluminium body carries a S45C hard-chrome rod, fixed TPU bumpers sit at both ends, and the optional -S magnet enables CMSE / DMSE switches; this unit has no magnet fitted.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A short-body 125 mm bore pushing 6135.9 N at 0.5 MPa crimps terminals and inserts bushings where a full-length profile cylinder will not fit the frame.
The 0-75 mm adjustable extend range lets one cylinder serve several fixture heights on a heavy fabrication line, with the stop screw set per part.
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod still drifts if air is lost. Mount with FA flange or LB foot on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and order the -S code if CMSE / DMSE position sensing is needed.
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 75 mm extend stroke on site, so the usable range is 0-75 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/4" PT port and male rod thread.
It is an ISO 21287 compact cylinder, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 25 mm rod and fixed TPU bumpers at both ends that decelerate only at the ends of travel. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the standard ISO 21287 face. Position sensing requires the optional -S magnet code for CMSE / DMSE switches; without -S there is no magnet and no switch can be mounted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.