
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X150-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This is a double acting AirTAC ACEJ compact cylinder built to ISO 21287, with a 32 mm bore and a 150 mm stroke that an external stop screw can trim anywhere in a 100 mm window, giving a usable extend range of 50-150 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical peak of 82 kgf at 1.0 MPa. The B code gives a male 12 mm rod thread, and the 1/8" port depends only on the bore.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries an S45C hard-chrome rod, and speeds run 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). Note there is no magnet fitted on this version; the optional -S code is what enables CMSE / DMSE switch sensing.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X150-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 150 mm stroke clears a 300 mm conveyor lane, and trimming the stroke with the stop screw sets the exact eject position for each carton format at up to 500 mm/s.
The 150 mm stroke is within the 200 mm max standard stroke for this bore, so no made-to-order length is needed. Remember the stop screw only shortens the extend stroke within the 100 mm window and is a mechanical end stop, not a mid-stroke lock, so the rod will drift if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and if position feedback matters, order the -S variant so CMSE / DMSE switches can be fitted.
Quick checklist
It is double acting with an adjustable extend stroke: the stop screw trims the 150 mm stroke by up to 100 mm, so the working range is 50-150 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, with a fixed TPU bumper at both ends.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and threaded aluminium covers, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with an S45C hard-chrome plated 12 mm rod and a male thread on this B version. FA flange and LB foot mounts bolt straight to the ISO 21287 face. Sensing requires the optional -S magnet code; this model has no magnet, so CMSE or DMSE switches cannot be used unless you order the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.