
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X160-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ32X160-100B is a double acting AirTAC ISO 21287 compact cylinder with an adjustable extend stroke. The male-threaded rod (B code) suits external tooling plates, and the 1/8" PT port is set by the bore.
The -100 code means the 160 mm stroke can be trimmed on site by up to 100 mm with an external stop screw, giving a usable range of 60-160 mm - one cylinder covers several jig positions. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding. A fixed TPU bumper at both ends absorbs end-of-stroke energy; the hard-anodized aluminium body and S45C hard-chrome rod resist wear.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X160-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Trim the 160 mm stroke down to 60 mm for shallow weldment clamps, using about 241 N of usable push at 0.5 MPa on steel brackets.
The 60-160 mm adjustable window lets one cylinder serve multiple carton sizes; the male rod thread accepts a custom pusher plate.
If your load needs under 245.4 N, the 25 mm bore saves space; if you need more, the 40 mm bore gives 628.3 N at the same pressure. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - the rod still drifts if air is lost, so add a separate clamp for load holding. FA flange or LB foot mounting bolts to the ISO 21287 face, and rod knuckles I or Y suit the male rod thread. If you later need position sensing, order the -S variant with the optional magnet for CMSE / DMSE switches; this model has no magnet fitted.
Quick checklist
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. It is double acting with a 160 mm stroke adjustable down to 60 mm via the -100 stop screw, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), operates from -20 to +70 C at 30-500 mm/s, and uses a 1/8" PT port with a 12 mm male-threaded rod.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting narrow gantries and guarded cells. FA flange and LB foot brackets bolt straight to the standard face, and I or Y rod knuckles suit the male thread. A fixed TPU bumper at each end absorbs end-of-stroke impact. Position sensing requires the optional -S magnet code, which enables CMSE / DMSE switches; this model, without the S code, has no magnet fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.