
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting compact cylinder built to ISO 21287, the ACEJ32X175-100B pairs a 32 mm bore with a 175 mm stroke that an external stop screw can trim by up to 100 mm, giving a usable extend range of 75-175 mm on site. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N, with a theoretical 82 kgf at 1.0 MPa. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it slots into tight machine frames and gantries.
The S45C hard-chrome rod ends in a male thread (the B code), the air port is 1/8", and a fixed TPU bumper at each end absorbs end-of-stroke energy. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi). Note that no magnet is fitted unless you order the optional -S code, and the stop screw is a mechanical end stop, not a mid-stroke lock.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body fits under low conveyor guard rails, and the male-thread rod (B code) accepts a custom pusher plate to kick off-spec cartons at 30-500 mm/s.
The 175 mm stroke is within the 200 mm maximum standard stroke for this bore, so no made-to-order build is needed. If your jig needs position feedback, order the -S variant so CMSE / DMSE switches can be mounted; this B-coded unit has no magnet. FA flange and LB foot mounts plus I and Y rod knuckles bolt to the standard ISO 21287 face. Remember the adjuster only shortens the extend stroke and drifts on air loss.
Quick checklist
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -100 code sets a 100 mm adjustment window: an external stop screw shortens the 175 mm extend stroke by up to 100 mm, so the working range is 75-175 mm. It cannot lengthen the stroke beyond 175 mm, and the stop is not a load-holding brake - the piston drifts if air is lost.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits shallow guards and jigs. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model has no magnet fitted; order the optional -S code to enable CMSE / DMSE switches. FA flange, LB foot, FTC brackets and I/Y rod knuckles mount on the standard ISO 21287 face, and the rod end is male thread with a 1/8" air port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.