
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ32X175-30B is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 175 mm stroke that an external stop screw can trim by up to 30 mm on site, giving a usable extend range of 145-175 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those rise to 563 N and 483.8 N, with a theoretical 82 kgf at 1.0 MPa. The hard-anodized aluminium body and hard-chrome plated S45C rod suit continuous jig and fixture duty.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight gantries and guarding where a full-length cylinder will not fit. The male rod thread (B code) bolts straight to standard ISO 21287 fixtures, and FA flange or LB foot mounts are available. The optional -S magnet enables CMSE / DMSE switches; without it no magnet is fitted.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
With a 175 mm stroke and speeds of 30-500 mm/s, it kicks cartons between conveyor lanes, and the fixed TPU bumper tames end-of-stroke impact.
The male rod thread and FA flange mounting drop it into assembly stations that eject finished parts, where the short ISO 21287 body fits under low guarding.
The 175 mm stroke is within the 200 mm standard range for bore 32, so no made-to-order stroke is needed. Remember the stop screw only shortens the extend stroke within the 30 mm window - it is not a mid-stroke lock, and on air loss the piston still drifts. Order the -S code if you want position sensing with CMSE / DMSE switches.
Quick checklist
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, and speed 30-500 mm/s.
The -30 code means an external stop screw shortens the 175 mm extend stroke by up to 30 mm, giving 145-175 mm of usable travel; the fixed TPU bumper at each end absorbs end-of-stroke energy. The B code gives a male rod thread on the 12 mm rod, with a 1/8" PT port, and FA flange or LB foot mounts bolt to the standard ISO 21287 face. The optional -S magnet allows CMSE / DMSE switches - this unit has no magnet fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.