
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X200-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ32X200-100B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. Air drives the piston both ways, and an external stop screw trims the 200 mm stroke by up to 100 mm on site, giving a usable extend range of 100-200 mm without changing the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 200 mm stroke model still fits jigs, guards and gantries where a full-length profile cylinder will not. The hard-anodized aluminium body carries a S45C hard-chrome plated 12 mm rod, a fixed TPU bumper sits at both ends, and the B code gives a male rod thread with a 1/8" PT port. Note the stop screw is a mechanical end stop only: on air loss the piston drifts, so it never holds a load in position.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X200-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
On a machining fixture, the stop screw lets a technician dial the extend stroke anywhere from 100 to 200 mm to match different part heights, using about 240 N of usable clamp force at 0.5 MPa.
Size both ways before ordering. Check the pull figure (345.6 N) if the return stroke does real work too. This unit has no magnet fitted, so no CMSE or DMSE switch can be mounted; order the -S code instead if end-position sensing matters. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face. Speed range is 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Quick checklist
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s. The extend stroke is adjustable from 100 to 200 mm via the external stop screw, and the port is 1/8" PT with a male rod thread.
The -100 code is a 100 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 100 mm, so the usable range is 100-200 mm. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model has no magnet, so no sensor can be fitted; order the -S version to enable CMSE or DMSE switches. The hard-anodized aluminium compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.