
The AirTAC ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X200-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ32X200-10B is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 200 mm stroke that an external stop screw can trim by up to 10 mm, giving a usable extend range of 190-200 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, rising to 563 N and 483.8 N at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into long-stroke gantries and guarding where a full-length profile cylinder will not fit.
The hard-anodized aluminium body carries a hard-chrome plated S45C rod with a male thread (the B code), and a fixed TPU bumper at each end absorbs end-of-stroke energy. Note that this unit has no magnet fitted: order the optional -S code if you need CMSE or DMSE switch position sensing. Operating window is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um.
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X200-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 200 mm stroke reaches across conveyor lanes while the short ISO 21287 body keeps the gantry frame slim; about 12 kg vertical lift capability covers typical plastic housings and brackets.
The male rod thread (B) takes an I or Y knuckle for a pusher plate, ejecting cartons off a belt at 30-500 mm/s, with the fixed TPU bumper softening every end-of-stroke stop.
The 200 mm stroke is the maximum standard stroke for this bore, so no made-to-order length is involved. The stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. FA flange or LB foot mountings bolt to the ISO 21287 face, and the male rod thread (B) suits rod knuckles such as the I and Y types. If position feedback matters, order the -S variant with the optional magnet for CMSE / DMSE switches.
Quick checklist
Bore 32 mm, stroke 200 mm adjustable within a 10 mm window (usable extend range 190-200 mm). Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push is 563 N and pull 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, port 1/8" PT, rod 12 mm with male thread.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a hard-chrome plated S45C rod and a fixed TPU bumper at both ends; the body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This version has no magnet, so no sensor can be read from it; choose the optional -S magnet code to enable CMSE or DMSE switches. FA flange and LB foot mountings, plus I and Y rod knuckles, bolt straight to the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.