
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ50X75-20B is a double acting ISO 21287 compact cylinder with a 50 mm bore and a 75 mm stroke that an external stop screw trims by up to 20 mm, giving a usable extend range of 55-75 mm. At 0.5 MPa it pushes 981.7 N and pulls 881.2 N, rising to 1374.4 N at 0.7 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarded stations. A hard-anodized aluminium body carries an S45C hard-chrome plated 16 mm rod, fixed TPU bumpers absorb end-of-stroke impact at both ends, and the male rod thread (B code) with PT ports bolts straight into standard fixtures. FA flange and LB foot mounts fit the ISO 21287 face. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it is not a load-holding lock.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The 75 mm stroke with a 20 mm stop-screw window positions part stops precisely, and the male rod thread accepts a custom stop pad; fixed TPU bumpers quiet each engagement at 30-500 mm/s.
If your cycle needs position feedback, order the -S variant instead, since this model has no magnet and no CMSE / DMSE switch can be fitted. The 20 mm window means you must set the stop between 55 and 75 mm; it cannot extend the stroke past 75 mm. Choose the male rod thread (B) for knuckle or external attachments, and add FA or LB mounting to match your fixture face.
Quick checklist
Push is 981.7 N and pull is 881.2 N at 0.5 MPa; at 0.7 MPa push reaches 1374.4 N, with a theoretical maximum of 200.2 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s. The extend stroke is adjustable from 55 to 75 mm via the external stop screw, and the 1/8" PT ports suit the 50 mm bore.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome plated 16 mm rod, threaded aluminium covers and fixed TPU bumpers at both ends, about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has no magnet, so no switch can be mounted; order the -S code to enable CMSE / DMSE switches. FA flange and LB foot mounts bolt to the standard ISO 21287 face, and the B code gives a male rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.