
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ50X75-30B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 75 mm stroke by up to 30 mm, giving a usable range of 45-75 mm without changing the cylinder. At 0.5 MPa the 50 mm bore delivers 981.7 N on extend and 881.2 N on retract, rising to 1374.4 N at 0.7 MPa, so it covers mid-duty clamping and pressing work in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a male thread (B code), a fixed TPU bumper at both ends, and 1/8" ports. No magnet is fitted on this version; order the -S code if you later need CMSE / DMSE switch sensing.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Trim the stroke to 45 mm so the 981.7 N ram seats automotive bushings in housings without bottoming out the tooling.
The 30 mm adjustment window lets one cylinder serve mixed carton heights on the same packaging lane, cycling at 30-500 mm/s.
The short ISO 21287 body fits inside the jig envelope where a full-length profile cylinder would foul the guard, with FA flange mounting.
The 75 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so no made-to-order build is needed. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston can still drift, so use a separate valve or lock for load holding. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face, and the male rod thread suits external rod couplings.
Quick checklist
Push is 981.7 N and pull 881.2 N at 0.5 MPa; at 0.7 MPa push reaches 1374.4 N (theoretical maximum 200.2 kgf at 1.0 MPa). It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, with 1/8" ports, a 16 mm male-thread rod and a 30 mm stroke adjustment window (45-75 mm usable).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy. This model has no magnet fitted; the optional -S magnet enables CMSE / DMSE switches, so order ACEJ50X75-30SB if sensing is required. FA flange, LB foot and I/Y knuckles mount directly on the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.