
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-75 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ50X75-75 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 75 mm stroke anywhere in a 0-75 mm window, so one unit covers several fixture positions.
The hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in tight guarding and gantry frames. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet (not fitted on this code) enables CMSE / DMSE switches.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ50X75-75 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
On packaging lines, the compact body fits inside shallow forming heads where an ISO 15552 profile cylinder would not, pressing carton flaps at up to 500 mm/s.
Remember the stop screw is a mechanical end stop only; on air loss the piston drifts, so it is not a load-holding device.
FA flange or LB foot mounts bolt to the ISO 21287 face, and I / Y rod knuckles pair with the female M10x1.5 rod thread. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um, speed 30-500 mm/s. If you need position sensing, order the -S variant.
Quick checklist
At 0.5 MPa it pushes 981.7 N and pulls 881.2 N; at 0.7 MPa those rise to 1374.4 N and 1233.7 N, with a theoretical maximum of 200.2 kgf at 1.0 MPa. The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 75 mm extend stroke on site anywhere from 0 to 75 mm. It cannot lengthen the stroke beyond 75 mm, and the stop is a mechanical end stop, not a mid-stroke lock - the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to absorb end-of-stroke impact. Sensing is not included on this code: the magnet is the optional -S order code, so if you need CMSE or DMSE reed or solid-state switches, specify ACEJ50X75-75S instead. Mounting is via FA flange or LB foot on the standard ISO 21287 face, with a female M10x1.5 rod thread and 1/8" ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.