
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X150-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ63X150-100B is a double acting ISO 21287 compact cylinder from AirTAC with a 63 mm bore and a 150 mm stroke that an external stop screw can trim on site. The -100 code sets a 100 mm adjustment window, so the extend stroke is set anywhere from 50 to 150 mm without swapping the cylinder. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa, with a theoretical maximum of 317.9 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which helps when a 150 mm stroke must fit inside a guarded machine frame. The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod with a male thread (the B code), and a fixed TPU bumper at each end absorbs end-of-stroke shock. Plan on roughly 935 N of real work at 0.5 MPa, about 95 kg of vertical lift with a sensible margin, and match a real part weight to that figure.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X150-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Pushes cartons or trays off a conveyor at 30-500 mm/s, and the stop screw trims the throw to match lane width without changing hardware.
Opens and closes heavy guide gates on palletizing cells; the compact body fits where an ISO 15552 profile cylinder of the same stroke would not.
The stop screw is a mechanical end stop for the extend stroke only, so on air loss the piston can still drift - never rely on it to hold a load mid-stroke. FA flange and LB foot mountings bolt to the ISO 21287 face, and I or Y rod knuckles suit the male rod thread. This unit has no magnet; if CMSE or DMSE switches are needed, order the -S version instead.
Quick checklist
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push is 2182.1 N and pull 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -100 code gives a 100 mm adjustment window: an external stop screw shortens the 150 mm extend stroke to any setting from 50 to 150 mm. It shortens the stroke only and never lengthens it past 150 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 150 mm stroke fits tight guards and gantries. FA flange and LB foot mountings plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the 16 mm rod carries a male thread (B code) with a 1/8" PT port. Sensing requires the optional -S magnet code, which enables CMSE or DMSE switches; this model, ordered without -S, has no magnet and accepts no switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.