
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X175-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ63X175-100B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. The -100 code means an external stop screw trims the 175 mm extend stroke down to as short as 75 mm on site, so one cylinder covers several fixture positions. Its hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits long-stroke gantries and sliding guards that still need a tight envelope. Fixed TPU bumpers absorb end-of-stroke shock at both ends, and FA flange or LB foot mounts bolt to the standard ISO 21287 face.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X175-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Trim the extend stroke anywhere in the 75-175 mm window to match different bottle pitches, with 1558.6 N at 0.5 MPa pushing diverters on a 63 mm bore.
Note the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate valve or clamp for load holding. This unit has the B male rod thread and PT ports; if you need position feedback, order the -S version so CMSE / DMSE switches can be fitted.
Quick checklist
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; theoretical maximum is 317.9 kgf at 1.0 MPa. The -100 code sets a 100 mm adjustment window: an external stop screw shortens the 175 mm extend stroke to any length down to 75 mm. It is a mechanical end stop only - it does not hold a load if air is lost. Speed range is 30-500 mm/s and operating pressure is 0.15-1.0 MPa (22-145 psi).
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 16 mm rod and threaded covers, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Fixed TPU bumpers at both ends absorb end-of-stroke energy. This unit has a male rod thread (B) and 1/8" PT ports. Position sensing requires the optional -S magnet code; with -S fitted, AirTAC CMSE or DMSE switches mount in the body slots. FA flange and LB foot mounts fit the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.