
The AirTAC ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X200-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø63mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ63X200-100B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 200 mm stroke by up to 100 mm on site, giving a usable range of 100-200 mm without changing the cylinder.
The hard-anodized aluminium body carries a 16 mm S45C hard-chrome rod, and the B code gives a male rod thread with a PT port thread. The fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches; this unit has no magnet fitted.
| Model | Airtac ACEJ50~63 Adjustable Compact Air Cylinder ACEJ63X200-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Swing or lift gates on pallet conveyors need a mid-range stroke that can be trimmed to the gate geometry; the compact body fits between guard rails where a full-length profile cylinder will not.
Pushing filled cartons off a lane takes about 935 N of usable effort at 0.5 MPa from this 63 mm bore, and the stop screw sets the ejection travel between 100 and 200 mm.
If the stroke must be set exactly at 200 mm with no trimming, the fixed-stroke ACE63X200 does the same work; the -100 window here is for machines where the stop position is tuned during commissioning. FA flange or LB foot mounts bolt to the ISO 21287 face, and I/Y rod knuckles suit the male thread. Remember the stop screw is an end stop only - it does not hold a load if air is lost.
Quick checklist
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N, and the theoretical maximum is 317.9 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 100 mm, so the working range is 100-200 mm. It cannot lengthen the stroke past 200 mm, and the stop is not a load-holding brake - the rod drifts if air pressure is lost. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
It is an ISO 21287 short-body cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, threaded aluminium covers, a 16 mm hard-chrome S45C rod and a fixed TPU bumper at each end. Sensors are possible only with the optional -S magnet code, which allows CMSE or DMSE switches; this model (no S code) has no magnet, so no switch can be read. Mounting options include FA flange and LB foot, with PT ports and a male rod thread from the B code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.