Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B
This is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 275 mm stroke by up to 10 mm, giving a usable range of 265-275 mm without changing the cylinder.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, the male rod thread (B code) bolts straight to your linkage, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Note: no magnet is fitted on this code; order the optional -S version if you need CMSE / DMSE switch position sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B Is Used
Gate drive on heavy machinery
The male rod thread (B code) picks up a gate or guard linkage directly, while the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder inside tight machine frames.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B the Right Cylinder?
The 275 mm stroke is within the 300 mm maximum standard stroke for this bore, so no made-to-order build is needed. The stop screw is a mechanical end stop only: on air loss the piston still drifts, so add a separate valve or lock if you must hold a load mid-stroke. Mount with FA flange or LB foot on the ISO 21287 face, and specify the -S code if CMSE / DMSE switches will be needed later.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N and pull to 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 275 mm extend stroke by up to 10 mm, so the working range is 265-275 mm. It is double acting on 1/8" PT ports, operates on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, and runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod and FA/LB mounting on the standard face. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not an adjustable device and never holds or brakes a load. Position sensing requires the optional -S magnet code - this unit has no magnet fitted, so order -S if you plan to use CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.