Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B
A double acting ISO 21287 compact cylinder with a 100 mm bore and a 275 mm stroke, the ACEJ100X275-75B carries an external stop screw that trims the extend stroke by up to 75 mm on site, giving a usable range of 200-275 mm without changing the cylinder. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and the male rod thread (B code) bolts straight to your tooling. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so long-stroke power fits inside guards and gantry frames that a full-length body cannot.
The hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with fixed TPU bumpers at both ends. FA flange and LB foot mounts, plus I/Y rod knuckles, bolt to the standard ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B Is Used
Bench-top press station
Roughly 240 kg of usable work force at 0.5 MPa suits light staking and pressing of bushings and bearings, with the stop screw setting the exact top-of-stroke position.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B the Right Cylinder?
Size against neighbours: the 80 mm bore pushes 2513 N at 0.5 MPa, while stepping up to 125 mm buys 6135.9 N - this 100 mm bore at 3927 N sits between them for heavy clamping, pressing and lifting. Note that the stop screw is a mechanical end stop for the extend stroke only; on air loss the piston still drifts, so it is not a load-holding lock. If you need position sensing, order the -S variant, since this model has no magnet and no CMSE / DMSE switch can be read without it. PT ports, male rod thread, FA/LB mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N (pull 5277.9 N), with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 275 mm extend stroke on site, so the working range is 200-275 mm. It runs double acting on 0.15-1.0 MPa (22-145 psi) air at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the standard face. Position switches (CMSE / DMSE) require the optional -S magnet code; this model, ordered without -S, carries no magnet, so no sensor can be mounted on it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X275-75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.