Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 300mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B
Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping and pressing stations fit inside guards and gantries that a full-length cylinder cannot enter. The -40 code adds a 40 mm adjustment window: an external stop screw trims the extend stroke anywhere between 260 and 300 mm on site.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod with a male thread (B code), and 1/8" ports feed air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Fixed TPU bumpers absorb end-of-stroke shock at both ends, speed spans 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches - this unit ships without it.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B Is Used
Gate drive inside a machine guard
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, sliding a 300 mm heavy slide gate in the tight space behind a guard panel.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B the Right Cylinder?
The 40 mm window suits fixtures where the final stroke is tuned after installation - trim the 300 mm extend stroke down to 260 mm by turning the stop screw. Note the adjuster is a mechanical end stop only: on air loss the piston drifts, so it never holds a load mid-stroke. FA flange or LB foot mountings bolt to the ISO 21287 face, and if position feedback is needed later, order the -S variant so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The -40 code gives a 40 mm adjustment window: an external stop screw shortens the 300 mm extend stroke to as little as 260 mm. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, 20 mm hard-chrome rod, male rod thread, 1/8" ports and fixed TPU bumpers at both ends. Sensing requires the optional -S magnet: this model has no magnet, so CMSE / DMSE switches cannot be mounted unless you order the -S code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X300-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.