Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B
A double acting ISO 21287 compact cylinder with a 100 mm bore and a 60 mm stroke, the ACEJ100X60-40B pushes 3927 N and pulls 3769.9 N at 0.5 MPa (rising to 5497.8 N at 0.7 MPa), so it carries heavy clamping and press-fit work in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. The B code gives a male S45C hard-chrome rod thread, and the 1/8" PT ports feed air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
The -40 code is a 40 mm adjustment window: an external stop screw trims the extend stroke anywhere between 20 and 60 mm on site, so one cylinder serves several die or fixture positions without re-plumbing. A fixed TPU bumper at each end absorbs end-of-stroke shock, speeds run 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B Is Used
CNC fixture actuation
The short ISO 21287 body drops into cramped CNC machining-centre fixtures where a full-length profile cylinder will not fit, with FA or LB mounting bolting straight on.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B the Right Cylinder?
The stop screw is a mechanical end stop only - on air loss the piston still drifts, so add a separate valve or lock for load holding. Bolt FA flanges, LB feet or I/Y rod knuckles to the ISO 21287 face, and order the -S code if you need CMSE / DMSE position switches; without it there is no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any value from 20 to 60 mm. It is a mechanical end stop, not a mid-stroke lock, so the rod can still drift if air is lost.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FA flange, LB foot or I/Y knuckle mounting on the standard face. Position sensing needs the optional -S magnet code: with -S ordered, CMSE or DMSE switches mount in the body slots; without -S there is no magnet and no sensor can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X60-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.