Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ100X80-75SB pairs a 100 mm bore with an 80 mm stroke and a 75 mm trim window. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body and S45C hard-chrome plated 20 mm rod stand up to high-cycle factory work, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Because the -75 stop screw trims the extend stroke anywhere from 5 to 80 mm on site, one cylinder can serve several fixture positions without re-plumbing. This model carries the optional -S magnet, so CMSE / DMSE switches can be added for end-of-stroke sensing, and the male (B) rod thread suits knuckle attachments.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB Is Used
Clamping heavy weld fixtures
With about 2356 N of usable push at 0.5 MPa, the 100 mm bore holds steel weldments firmly while the 75 mm trim window lets one cylinder serve jigs of different part heights.
Short-stroke press stations
The 5-80 mm adjustable extend range suits marking, staking and light forming on assembly lines, delivering up to 5497.8 N at 0.7 MPa in a body far shorter than an ISO 15552 profile cylinder.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB the Right Cylinder?
If your press or clamp needs more than about 2356 N of working force at 0.5 MPa, the 100 mm bore is the right class. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face; order PT or G ports as required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 80 mm extend stroke to any length from 5 to 80 mm. It is a mechanical end stop, not a load-holding lock, so the piston still drifts on air loss. Operating range is 0.15-1.0 MPa (22-145 psi) with 30-500 mm/s speed.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots; without the -S code there is no magnet. Ports are 1/8" (PT), the rod thread is male (B), and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X80-75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.