Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B
A big-bore ISO 21287 compact cylinder that works double acting: air drives the rod out and pulls it back, and an external stop screw trims the extend stroke anywhere in the ordered 75 mm window, giving a usable range of 15-90 mm. The B code specifies a male rod thread on the 20 mm rod, and the port is 1/8" PT.
The hard-anodized aluminium body with an S45C hard-chrome-plated rod keeps the mounting length roughly half that of an ISO 15552 profile cylinder, so heavy clamping or pressing fits into tight machine frames. Fixed TPU bumpers absorb end-of-stroke shock, speed spans 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B Is Used
Bench-top press heads
Short-body mounting saves roughly 50% of the length of an ISO 15552 profile cylinder, so the press head fits inside a compact guarding frame while still delivering 5497.8 N at 0.7 MPa.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B the Right Cylinder?
The stop screw is a mechanical end stop only - on air loss the piston drifts, so add a separate valve or lock if position must be held. FA flange or LB foot mountings bolt to the ISO 21287 face; this unit has no magnet, so if CMSE or DMSE switches are needed later, order the -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, and the theoretical maximum is 800.9 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 90 mm extend stroke on site, so the usable range is 15-90 mm. It shortens the stroke only - it never extends it past 90 mm, and it is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C hard-chrome-plated 20 mm rod, threaded aluminium covers, and a fixed TPU bumper at each end to absorb end-of-stroke shock. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model has no magnet fitted; order the -S code to enable CMSE or DMSE switches. Mounting options include FA flange and LB foot, with I and Y rod knuckles. Operating spec: 0.15-1.0 MPa (22-145 psi), -20 to +70 C, 30-500 mm/s, air filtered to 40 um.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X90-75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.