Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB
The ACEJ80X100-10SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 100 mm stroke by up to 10 mm on site, giving a usable range of 90-100 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa - enough for heavy clamping and pressing in a body that saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The rod end carries a male thread (B code) and the air ports are 1/8". Because the S magnet is fitted, CMSE or DMSE reed and solid-state switches mount directly in the body slots for end-of-stroke signalling. A fixed TPU bumper at each end absorbs stop energy, and the hard-anodized aluminium body with an S45C hard-chrome rod stands up to continuous production duty.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB Is Used
Pallet press-down station
On a conveyor palletizing head, the 80 mm bore seats cartons or totes with up to about 153 kg of practical working force, while the fitted magnet signals full seat via a CMSE switch.
Gate and die slide actuation
Die-changing slides and heavy machine guards need a short body: the compact footprint fits where a full-length profile cylinder will not, and the male rod thread suits knuckle or yoke links.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB the Right Cylinder?
If your fixture needs roughly 2500 N at 0.5 MPa, this 80 mm bore sits in the middle of that range with headroom at 0.7 MPa. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock - on air loss the piston drifts, so add external stops or a locking solution where load holding matters. Mount via FA flange or LB foot on the ISO 21287 face; the S magnet is already fitted here, so CMSE / DMSE switches can be added without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: a stop screw shortens the 100 mm extend stroke by up to 10 mm, so the working range is 90-100 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and guards. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount in the body slots for end-of-stroke detection. FA flange and LB foot mountings bolt to the standard face, and the male rod thread accepts I or Y knuckles. A fixed TPU bumper at each end absorbs stop energy; it does not lock or hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.