Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB
A double acting ISO 21287 compact cylinder, the ACEJ80X100-30SB pairs an 80 mm bore with a 100 mm stroke that an external stop screw trims anywhere in a 30 mm window, giving a usable extend range of 70-100 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. Air is the only fluid, filtered to 40 um, at 0.15-1.0 MPa (22-145 psi) and speeds of 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and fixtures where a full-length body cannot. Because the -S magnet is fitted on this model, CMSE / DMSE reed or solid-state switches can be clipped onto the body for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke shock but never locks or holds a load.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB Is Used
Pneumatic press fixture
Delivers 2513.3 N at 0.5 MPa for staking or forming aluminium brackets, with the 30 mm window letting the operator trim the 100 mm stroke to the die height on site.
Pallet gate actuator
Swings heavy pallet-line gates through the 70-100 mm trimmed range, and the fitted magnet with CMSE switches confirms gate-open and gate-closed to the PLC.
Machine guard clamp
Clamps injection-mould tooling inserts with about 154 kg of usable push, while the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder inside the guard.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB the Right Cylinder?
The stop screw only shortens the extend stroke within the ordered 30 mm window and is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches; the male (B) rod thread suits external knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N; theoretical maximum is 512.6 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 100 mm extend stroke by up to 30 mm, so the working range is 70-100 mm. It cannot lengthen the stroke past 100 mm, and the stop is an end stop only, not a load-holding brake.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and S45C hard-chrome plated 20 mm rod, saving about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at both ends absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots; FA flange and LB foot mounts bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X100-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.