Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ80X150-100B pairs an 80 mm bore with a 150 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. An external stop screw trims the extend stroke anywhere within the ordered 100 mm window, giving a usable range of 50-150 mm without swapping the cylinder.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and machine frames where a full-length body cannot. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, a fixed TPU bumper sits at both ends, and 1/8" ports feed air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with speeds of 30-500 mm/s. Note: no magnet is fitted on this version, so CMSE / DMSE switches cannot be used unless you order the -S code.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B Is Used
Bench-top crimping press
A 150 mm stroke trimmed down to 60 mm lets the 80 mm bore deliver 2513.3 N at 0.5 MPa exactly where a terminal-crimping die needs it, with the male rod thread taking a custom press tool.
Aluminium extrusion stopper
As an end-of-line stop on an extrusion conveyor, the 50-150 mm adjustable range sets the stop position per profile size, and the 1/8" port keeps cycle response fast at 30-500 mm/s.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B the Right Cylinder?
If you need position feedback, order the -S variant instead, since this model has no magnet and accepts no switch. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. Remember the stop screw is a mechanical end stop for the extend stroke only: on air loss the piston still drifts, so add a separate valve or lock if you must hold a load mid-stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -100 code means an external stop screw shortens the 150 mm extend stroke by up to 100 mm, so the working range is 50-150 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy. This version has no magnet, so no CMSE or DMSE switch can be mounted; order the -S code if you need switching. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 mounting face, and the B code gives a male rod thread. Outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.