Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S
The ACEJ80X150-100S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 150 mm stroke by up to 100 mm on site, giving a usable range of 50-150 mm without changing the cylinder. A practical rule of thumb: plan for about 1508 N of real work at 0.5 MPa, which is roughly 60% of the rated push.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 80 mm bore fits deep press fixtures and machine frames where a full-length cylinder will not reach. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, a fixed TPU bumper at each end absorbs end-of-stroke energy, and because this model carries the optional -S magnet, CMSE or DMSE reed and solid-state switches can be mounted anywhere along the body.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S the Right Cylinder?
If your fixture needs the full 150 mm stroke on every cycle, order a fixed-stroke ACE instead; choose this -100 version when the stroke must be dialed in on the machine. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted magnet lets CMSE / DMSE switches flag end positions. Remember the stop screw is a mechanical end stop only - on air loss the piston still drifts, so it is not a load-holding brake.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 150 mm extend stroke by up to 100 mm, so the working range is 50-150 mm. The stop is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port depends on the 80 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, a 20 mm hard-chrome-plated S45C rod and a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be slid into the body slots for position feedback. FA flange and LB foot mounts bolt straight to the ISO 21287 face, and the rod end is a female M12x1.75 thread. Weight and outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.