Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S
A double acting ISO 21287 compact cylinder, the ACEJ80X150-20S pairs an 80 mm bore with a 150 mm stroke that an external stop screw trims by up to 20 mm, giving a usable extend range of 130-150 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, a fixed TPU bumper sits at each end, and the fitted -S magnet lets CMSE / DMSE switches report end positions. FA flange and LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S Is Used
Press-fit station for bearing assembly
With about 153 kg of vertical lift equivalent at 0.5 MPa, the cylinder presses bearings into pump housings on a short-stroke bench where the compact body saves roughly half the mounting length of an ISO 15552 profile cylinder.
Pusher on a bottling-line transfer conveyor
The 1/8" port and 30-500 mm/s speed band suit rapid case pushing, while the fitted -S magnet drives CMSE switches that confirm each push has reached the trimmed end position.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S the Right Cylinder?
At this bore size the 80 mm unit delivers 2513.3 N at 0.5 MPa; step down to a 63 mm bore (1558.6 N) for lighter clamping, or up to 100 mm (3927.0 N) when the load demands more. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve where a load must stay put. If you need position feedback, this model already carries the optional -S magnet for CMSE / DMSE switches; FA flange or LB foot mounting matches standard ISO 21287 fixtures. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um, speed 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, giving a usable range of 130-150 mm. It cannot lengthen the stroke past 150 mm, and the stop is an end stop only - it does not hold a load if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 20 mm S45C hard-chrome rod and a fixed TPU bumper at each end that decelerates the piston at stroke ends. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for end-position sensing. FA flange and LB foot mounts, plus I and Y rod knuckles, bolt to the standard ISO 21287 face; the rod end is female M12x1.75 and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X150-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.