Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10
The ACEJ80X160-10 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 10 mm, giving a usable range of 150-160 mm without changing hardware. At 0.5 MPa the 80 mm bore delivers 2513.3 N on extend and 2356.2 N on retract, rising to 3518.6 N at 0.7 MPa. As a rule of thumb, plan for roughly 1500 N (about 153 kg) of real work at 0.5 MPa rather than the full rating.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits guarded assemblies and tight gantry frames. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod stands up to continuous production duty.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 Is Used
Lift-and-lower gantry
Mounted FA flange on a machine-tool gantry, the cylinder raises and lowers a heavy fixture plate at 30-500 mm/s within the guarded frame envelope.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 the Right Cylinder?
Note that the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston will still drift if air is lost. Mounting: FA flange or LB foot bolt to the ISO 21287 face, with I and Y rod knuckles available. This unit has no magnet; if you need CMSE or DMSE switch position feedback, order the -S version instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N, and the theoretical maximum is 512.6 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 160 mm extend stroke by up to 10 mm, so the working range is 150-160 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" port and female M12x1.75 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 80 mm bore fits where a full-length profile cylinder will not. FA flange and LB foot mountings plus I/Y rod knuckles bolt straight to the standard face. Position sensing requires the optional -S magnet code: this model (no S) has no magnet, so no CMSE or DMSE switch can be read on it. A fixed TPU bumper at each end absorbs end-of-stroke energy only; it never locks or holds a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.