Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100
The ACEJ80X160-100 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 100 mm, giving a usable range of 60-160 mm without changing the cylinder. At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the extend stroke at 0.7 MPa. In practice, plan on roughly 1508 N of real work at 0.5 MPa, which is about 154 kg of horizontal load.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 80 mm bore fits presses, gantries and machine frames where a full-length cylinder will not. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange and LB foot mounts bolt to the standard ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 Is Used
Gantry clamp on a CNC line
The body is about 50% shorter than an ISO 15552 profile cylinder, so the 160 mm stroke clamps workpieces inside tight machine guards, with LB foot mounting on the standard ISO 21287 face.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 the Right Cylinder?
The stop screw is a mechanical end stop for the extend stroke only - it does not lock the piston mid-stroke, and on air loss the rod still drifts, so add a valve or external stop if you need position holding. Mount with FA flange or LB foot on the ISO 21287 face; if you need switch position feedback, order the -S variant, since this model has no magnet and no CMSE / DMSE sensor can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 160 mm extend stroke by up to 100 mm, so the usable range is 60-160 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" port and an M12x1.75 female rod thread.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to absorb end-of-stroke energy. FA flange and LB foot mounts bolt straight to the standard face. Sensors are only possible on the -S variant, which carries the optional magnet for CMSE / DMSE switches; this model has no magnet, so confirm the -S code at ordering if you need switching.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.