Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B
The ACEJ80X160-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 10 mm on site, giving a usable range of 150-160 mm without changing the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a fixed TPU bumper at both ends. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the male rod thread (B code) bolts straight into standard tooling. Note: no magnet is fitted on this model; order the -S code if CMSE / DMSE switch sensing is needed later.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B Is Used
Press and staking stations
With about 1508 N of practical working force at 0.5 MPa, this bore suits light pressing, staking and riveting of brackets and bushings on short-stroke presses.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B the Right Cylinder?
If your load needs more than about 1508 N of usable force at 0.5 MPa, the 80 mm bore is the right class. The -10 window only shortens the extend stroke; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange, LB foot and I/Y rod knuckles mount on the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B FAQ
The -10 code is a 10 mm adjustment window: an external stop screw shortens the 160 mm extend stroke to any setting between 150 and 160 mm. It is an end stop only, not a load-holding brake, and it cannot lengthen the stroke past 160 mm.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and a male rod thread on the 20 mm rod. FA flange, LB foot and I/Y rod knuckles bolt to the standard face. This version has no magnet; ordering the optional -S code adds one so CMSE / DMSE switches can sense position. Operating range is 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.