Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ80X160-30 pairs an 80 mm bore with a 160 mm stroke and a 30 mm trim window. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the extend stroke at 0.7 MPa. The external stop screw shortens the extend stroke on site anywhere within the ordered 30 mm window, so the same cylinder serves 130-160 mm stroke positions without reordering. Its hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into presses, gantries and machine guards where a full-length body simply will not fit.
The S45C hard-chrome plated 20 mm rod resists scoring in high-cycle service, and the fixed TPU bumper at each end absorbs end-of-stroke shock. FA flange and LB foot mounts plus I and Y rod knuckles bolt to the standard ISO 21287 face, and the optional -S magnet code enables CMSE or DMSE switches for end-position sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 Is Used
Pallet strapper clamp on packaging lines
Clamps carton stacks against a strapper head with about 1500 N of usable force at 0.5 MPa; the short ISO 21287 body fits the tight frame where an ISO 15552 profile cylinder is too long.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 the Right Cylinder?
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod still drifts if air is lost; use a separate valve or clamp for load holding. Order the -S code if you need CMSE / DMSE switch positions, and choose FA flange or LB foot mounting to match your fixture plate.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw trims the 160 mm extend stroke down to as little as 130 mm, so you set the exact end position on site without reordering. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
The hard-anodized aluminium ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight jig plates. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the standard face. Position sensing requires the optional -S magnet code: with it, CMSE or DMSE reed or solid-state switches seat in the body slots. This unit has no S code, so no magnet is fitted and no switch will read; order ACEJ80X160-30S instead if sensing is needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.