Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50
The ACEJ80X160-50 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 50 mm on site, giving a usable range of 110-160 mm without swapping the cylinder. At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the extend stroke at 0.7 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 80 mm bore fits presses, gantries and guarding where a full-length body will not. A hard-anodized aluminium body carries an S45C hard-chrome plated 20 mm rod, fixed TPU bumpers absorb end-of-stroke energy at both ends, and FA flange or LB foot mounts plus I/Y rod knuckles bolt straight to the standard face. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 Is Used
Gantry clamp fixture
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it clamps workpieces inside tight CNC gantry guards where a full-length 80 mm bore body would foul the frame.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 the Right Cylinder?
Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock; on air loss the rod still drifts, so add a separate holding valve if the load must stay put. FA flange and LB foot mounts suit fixed fixtures, and if you need position feedback, order the -S variant so CMSE / DMSE switches can ride the body - this model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -50 code sets a 50 mm adjustment window: an external stop screw shortens the 160 mm extend stroke to any length from 110 to 160 mm. It is a mechanical end stop only - it never holds or brakes a load, and the rod drifts if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 20 mm rod and fixed TPU bumpers at both ends. This version has no magnet, so no sensor can be mounted - order the -S code to enable CMSE / DMSE switches. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt to the standard face; the rod end is female M12x1.75 and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.