Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ80X160-50B pairs an 80 mm bore with a 160 mm stroke and a 20 mm hard-chrome S45C rod. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa - a force class that suits heavy clamping and press-fit work. The external stop screw trims the extend stroke anywhere in the ordered 50 mm window, giving a usable range of 110-160 mm without changing hardware.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into guarded weld cells and gantry frames where a full-length body cannot. Air is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with fixed TPU bumpers at both ends. Note this model has no magnet - order the optional -S code if you later need CMSE / DMSE switch position feedback.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B Is Used
Bench press and staking
3518.6 N at 0.7 MPa is enough for light staking, pressing and riveting on assembly benches where the short body fits under a guard.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B the Right Cylinder?
The stop screw is a mechanical end stop for the extend stroke only; on air loss the piston still drifts, so add a valve or external stop where load holding matters. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the male rod thread (B code) suits clevis-style tooling. PT ports; G thread available on request.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B FAQ
The 80 mm bore has a 20 mm rod, 1/8" PT ports and a 160 mm stroke adjustable down to 110 mm via the 50 mm stop-screw window. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA flange, LB foot and FTC brackets plus I/Y knuckles fitting the standard face. A fixed TPU bumper at each end absorbs end-of-stroke energy. Switches need the optional -S magnet code - this B-suffix model has no magnet, so order ACEJ80X160-50BS to run CMSE / DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-50B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.