Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 160mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S
The ACEJ80X160-75S is a double acting AirTAC ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 160 mm stroke by up to 75 mm on site, giving a usable range of 85-160 mm without changing the cylinder. At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and guarding where a full-length body will not fit.
The hard-anodized aluminium body carries a hard-chrome plated S45C rod, a fixed TPU bumper at each end absorbs end-of-stroke energy, and the fitted -S magnet accepts CMSE / DMSE switches for end-position sensing. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), and speed spans 30-500 mm/s.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S Is Used
Pallet gate actuation
The compact body fits inside conveyor guarding to swing or lift pallet-stop gates, where an ISO 15552 profile cylinder would be about twice as long in the same envelope.
Position-verified clamping
With the fitted -S magnet and CMSE switches, a fixture clamp on a CNC fixture plate confirms full clamp and retract positions, with the 75 mm window absorbing part-height variation.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S the Right Cylinder?
Remember the stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock, so the rod can still drift if air is lost. FA flange and LB foot mountings bolt to the ISO 21287 face, the female M12x1.75 rod thread suits standard rod knuckles, and this unit already carries the -S magnet so CMSE / DMSE switches can be added directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 160 mm extend stroke to any setting from 85 mm upward. It is a mechanical end stop only, not a load-holding lock, and the fixed TPU bumpers at both ends simply soften the ends of travel.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, hard-chrome plated S45C rod and threaded aluminium covers, about 50% shorter in mounting length than an ISO 15552 profile cylinder. The 1/8" PT ports take air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), speed is 30-500 mm/s, and the female M12x1.75 rod thread accepts standard knuckles. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots for end-position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.