Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S
The ACEJ80X200-100S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 200 mm stroke by up to 100 mm on site, giving a usable range of 100-200 mm without changing the order. At 0.5 MPa the 80 mm bore delivers 2513.3 N on the push stroke and 2356.2 N on the pull stroke, so it carries the heavy clamping and pressing duties in this series. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits guarded weld fixtures and deep-die presses where a full-length body will not fit.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped to the body for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body runs on a 20 mm hard-chrome S45C rod, and speed spans 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S Is Used
Press-fit and staking
The 100-200 mm adjustable range suits bearing or bushing pressing on conveyor roller assembly lines, with about 1508 N of usable work force at 0.5 MPa.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S the Right Cylinder?
Note that the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod can still drift if air is lost. FA flange and LB foot mountings bolt to the ISO 21287 face, and the -S magnet fitted here accepts CMSE / DMSE switches; the 1/8" port keeps air supply generous at 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N, and the theoretical maximum is 512.6 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 100 mm, so the working range is 100-200 mm. It cannot lengthen the stroke past 200 mm, and the stop is not a load-holding brake - on air loss the piston drifts.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted along the body slots for position feedback. FA flange and LB foot mountings attach to the standard face, a fixed TPU bumper sits at both ends, and the port size is 1/8".
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.