Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S
A double acting ISO 21287 compact cylinder, the ACEJ80X200-30S pairs an 80 mm bore with a 200 mm stroke that an external stop screw trims anywhere in a 30 mm window, so the working extend range is 170-200 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical 512.6 kgf at 1.0 MPa. The hard-anodized aluminium body and S45C hard-chrome plated rod run on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits guarded gantries and tight press fixtures. A fixed TPU bumper at each end absorbs end-of-stroke energy, and because this model carries the -S magnet, CMSE / DMSE reed or solid-state switches can be fitted for end-position sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S Is Used
CNC fixture clamping
Trims the clamp position on machining fixtures between 170 and 200 mm, delivering about 2513 N of holding force at 0.5 MPa on aluminium or steel workpieces.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S the Right Cylinder?
The 200 mm stroke sits well inside the 300 mm maximum standard stroke for bore 80, so no made-to-order stroke is needed. FA flange or LB foot mounts and I / Y rod knuckles bolt to the ISO 21287 face; the female M12x1.75 rod thread takes standard rod accessories. Remember the stop screw sets the extend end position only - it is not a mid-stroke lock, so the rod can drift if air is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S FAQ
Push is 2513.3 N and pull 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke: the -30 code gives a 30 mm stop-screw window, so the 200 mm stroke can be shortened to 170 mm. Ports are 1/8" (PT), the rod is 20 mm with a female M12x1.75 thread, speed is 30-500 mm/s, and operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
An external stop screw on the front head shortens the extend stroke by up to 30 mm on site - it sets the end position, it does not hold a load if air pressure drops. The fixed TPU bumpers at both ends absorb end-of-stroke energy. This model carries the optional -S magnet, so AirTAC CMSE or DMSE reed and solid-state switches can be clipped into the body slots for extend and retract signalling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.