Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S
The ACEJ80X200-50S is a double acting AirTAC compact cylinder to ISO 21287 with an adjustable extend stroke: an external stop screw trims the 200 mm stroke by up to 50 mm on site, giving a usable range of 150-200 mm. At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, a fixed TPU bumper at each end absorbs end-of-stroke shock, and because this model carries the -S magnet, CMSE / DMSE switches can be mounted for end-position sensing. Ports are 1/8" (PT), speed is 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S Is Used
Pallet gate actuator
Swings a heavy safety gate on a warehouse conveyor line; the compact body fits the guard frame where an ISO 15552 profile cylinder would overhang the walkway.
Clamped fixture with position check
Clamps machined housings in a CNC fixture while CMSE switches on the fitted -S magnet confirm full clamp before the cycle starts.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S the Right Cylinder?
Remember the stop screw is a mechanical end stop only: on air loss the piston still drifts, so add a valve or lock if you must hold a load mid-stroke. Bolt FA flange or LB foot mounts to the ISO 21287 face, add I or Y rod knuckles for side alignment, and order CMSE / DMSE switches to suit the fitted -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 50 mm, so the working range is 150-200 mm. It shortens the stroke only - it never extends past 200 mm, and it is an end stop, not a mid-stroke lock.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body with a roller-burnished bore, threaded aluminium covers, a 20 mm hard-chrome S45C rod and a fixed TPU bumper at each end that only decelerates at the ends of travel. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped anywhere along the body. FA flange and LB foot mounts plus I/Y knuckles bolt to the standard face; ports are 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X200-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.