Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10
A double acting ISO 21287 compact cylinder, the ACEJ80X275-10 pairs an 80 mm bore with a 275 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 265-275 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, and the hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod stands up to continuous jig and gantry duty. Air supply is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and rod speed runs 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and end-of-line stations where a full-length body will not fit. FA flange and LB foot mounts bolt to the standard ISO 21287 face, and the fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 Is Used
Pneumatic press station
Delivers 2513.3 N at 0.5 MPa for staking and forming aluminium brackets, with the 265-275 mm adjustable range tuned to the die height.
Pallet gate actuator
Swings heavy conveyor gates on a packaging line, where the short body fits inside the guard and the 1/8" PT ports keep plumbing simple.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 the Right Cylinder?
Remember the stop screw only shortens the extend stroke within the 10 mm window and drifts on air loss, so it is not a mid-stroke lock for suspended loads. If you need position sensing, order the -S variant so CMSE / DMSE switches can be fitted; this non-S model carries no magnet. Female M12x1.75 rod thread and 1/8" PT ports suit standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N. The theoretical maximum at 1.0 MPa is 512.6 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and rod speed is 30-500 mm/s.
An external stop screw shortens the 275 mm extend stroke by up to 10 mm, so the working range is 265-275 mm; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. This model has no magnet, so no sensors can be read from it; order the -S code to enable CMSE / DMSE switches. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and FA flange or LB foot mounts bolt to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.