Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B
The ACEJ80X275-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 275 mm stroke by up to 10 mm on site, giving a usable range of 265-275 mm without changing the cylinder. At the 80 mm bore it pushes 2513.3 N and pulls 2356.2 N at 0.5 MPa, rising to 3518.6 N at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The B code gives a male rod thread on the 20 mm rod, and the air port is 1/8" PT.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust cylinder still fits tight press fixtures and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome rod stands up to continuous cycling at 30-500 mm/s.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B Is Used
Pallet gate actuation
A 275 mm stroke swings heavy pallet-line gates and stops on conveyor systems, while the compact body fits the narrow guard space beside the frame.
Clamping of weld fixtures
About 1508 N of practical holding force clamps steel tube assemblies in automotive weld jigs; the male rod thread (B) accepts knuckle joints for angled clamping.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B the Right Cylinder?
The -10 window suits applications where the final position must be fine-tuned after installation - it shortens the extend stroke only and acts as a mechanical end stop, not a mid-stroke lock, so the rod can still drift if air is lost. Mount with FA flange or LB foot brackets on the ISO 21287 face, add I or Y rod knuckles for side misalignment, and order the optional -S magnet if CMSE / DMSE switch position sensing is needed later - this unit has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window: an external stop screw shortens the 275 mm extend stroke to any setting between 265 and 275 mm. It is a mechanical end stop for the extend stroke only - it does not hold a load if air pressure is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames. Position sensing requires the optional -S magnet code, which enables CMSE or DMSE switches; this model (no S code) has no magnet, so no switch can be mounted. FA flange and LB foot mountings bolt to the standard face, the port is 1/8" PT, and a fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.