Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B
This 80 mm bore ACEJ is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 275 mm stroke by up to 30 mm on site, giving a usable range of 245-275 mm without swapping the cylinder. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and guard spaces a full-length body cannot reach.
The hard-anodized aluminium body carries a S45C hard-chrome plated 20 mm rod, fixed TPU bumpers absorb end-of-stroke energy at both ends, and the male rod thread (B code) bolts straight into standard fixtures. Operating window is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B Is Used
Pallet gate and lifter actuation
The 275 mm stroke and about 128 kg vertical-lift margin suit gate lift and pallet-stop arms on warehouse conveyor lines, where the compact body mounts inside guard framing too tight for a long-profile cylinder.
Machine tool clamp fixture
On CNC fixture plates the FA flange or LB foot bolts to the ISO 21287 face, and the male rod thread (B code) takes I or Y knuckles for clamping turbine housings and gearbox casings in machining centres.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B the Right Cylinder?
The 275 mm stroke sits inside the 300 mm maximum standard stroke for this bore, so no made-to-order build is needed. The stop screw is a mechanical end stop only: it sets the extend position but does not lock the piston, so on air loss the rod still drifts. If position feedback is needed later, order the -S variant, since this unit has no magnet and accepts no CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -30 code gives a 30 mm adjustment window: the external stop screw shortens the 275 mm extend stroke to any length from 245 to 275 mm. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with fixed TPU bumpers at both ends.
It is an ISO 21287 compact cylinder: a hard-anodized aluminium body with a roller-burnished bore, threaded aluminium covers, a S45C hard-chrome plated 20 mm rod, and a body about 50% shorter in mounting length than an ISO 15552 profile cylinder. This unit has no magnet, so no switch can be read; if you need CMSE or DMSE reed or solid-state switches, order the -S version with the optional magnet. Mounting options include FA flange, LB foot and FTC brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.