Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ80X275-40 pairs an 80 mm bore with a 275 mm stroke and a 40 mm adjustment window. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The external stop screw trims the extend stroke on site anywhere in the 235-275 mm range, so one cylinder can be dialled to several fixture positions without reordering.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on wide gantries and press frames where every millimetre of envelope counts. The hard-anodized aluminium body carries an S45C hard-chrome plated 20 mm rod, fixed TPU bumpers absorb end-of-stroke energy, and FA flange or LB foot mounts bolt straight to the ISO 21287 face.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 Is Used
Clamping fixture for weld jigs
Clamps steel tube assemblies in automotive weld jigs, with the stop screw trimmed so the 275 mm stroke lands exactly on the jig without re-machining stops.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 the Right Cylinder?
Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the rod will still drift if air is lost. Specify the optional -S code if you later want CMSE or DMSE switches; this model has no magnet fitted. Rod end is female M12x1.75 with a 1/8" PT port, and LB foot or FA flange mounting suits fixed machine frames.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 275 mm extend stroke by up to 40 mm, giving a usable range of 235-275 mm. It is a mechanical end stop only, not a load-holding brake, and the fixed TPU bumpers simply decelerate the piston at each end.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight machine frames. Magnet slots run along the hard-anodized aluminium body, but this model has no magnet fitted; order the optional -S version to enable CMSE or DMSE switches. Mounting options include FA flange and LB foot, with I and Y rod knuckles available, and the 1/8" PT port suits standard air preparation at 0.15-1.0 MPa (22-145 psi).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X275-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.